CAMPINGMOON R35-6pcs Tent Peg Stainless Steel Peg Hard Ground

CAMPINGMOON R35-6pcs Tent Peg Stainless Steel Peg Hard Ground

1. Detachment prevention design
When the hook sticks into the ground, the ear of the hook part does not rotate the stake and at the same time prevents the rope from coming off.
2. Round hole
The round hole is designed so that the hook of the peg hammer can be caught. Rope can also be attached.
3. Flat Shape head
It has a flat shape head which makes it easy to hammer
The material is designed to be thicker in the pulling direction of the rope, so it can withstand toughness.
4. Long Lasting
Since the stainless steel material is forged as it is, the surface is not painted. Therefore, no need to worry about the paint peeling off and rusting when hit with a hammer. (* Stainless steel does not mean that it will never rust. It is resistant to rust.)

1. How to hit a peg?
The angle between the guy line and the peg is a right angle (90 degrees).
Tilt the pegs in the opposite direction of the tent so that they are at an angle of 60 degrees to the ground. If possible, drive until the guy line is closer to the ground.
2. How to pull out the peg?　
If you have a peg hammer, you can use the hook on the back to pull it out using the principle of leverage.
Hook another peg on the hook of the peg that is driven into the ground, and pull it out by pulling it or twisting it lightly.
3. Storage?
Wash mud stains with water in advance and dry it before store.

Detail:

R35-6pcs

Size: 350mm (head part / φ15mm, driving part / φ9-10mm ellipse)
Weight: 233g / pc (6 pieces total 1.4kg)
Material: Stainless steel 420J
Hardness: 250HB or more (20% -50% more stronger than normal stainless steel (SUS304))